Product Sectors

• Product Code

  11SMN30

  Grade

  11SMn30

  W.Nr.

  Nr.1.0715

  Steel with the addition of sulfur only, with good machinability.

  Download PDF

• Product Code

  10SPB20

  Grade

  10SPb20

  W.Nr.

  Nr.1.0722

  The most widespread carburized free-cutting steel; the addition of silicon guarantees the uniformity of the austenitic grain, while the limited percentage of sulfur allows a successful hardening treatment after carburizing.

  Download PDF

• Product Code

  35S20

  Grade

  35S20

  W.Nr.

  Nr.1.0726

  Steel with low carbon content and with the addition of sulfur for improved machinability.

  Download PDF

• Product Code

  AISI 2304

  Grade

  X2CrNiN23-4

  W.Nr.

  Nr.1.4362

  Duplex steel of recent design, it has a high resistance to corrosion. It is used in place of  AISI 304 and, for certain applications, also in place of  AISI 316.  Typical applications include the petrochemical industry, the paper industry, heat exchangers and valves for the oil and gas industry, and construction.

  Download PDF

• Product Code

  204Cu

  Grade

  X8CrMnCuN17-8-3

  W.Nr.

  Nr.1.4597

  Austenitic stainless steel.

  Download PDF

• Product Code

  SB4

  Grade

  C4C 

  W.Nr.

  Nr.1.0303

  Steel with a very low carbon content, intended for the cold forming of very deformed and difficult-to-obtain small parts.

  Download PDF

• Product Code

  AVZ

  Grade

  11SMn37

  W.Nr.

  Nr.1.0736

  Steel with the addition of sulfur only, in higher quantities than in 11SMn30; increased machinability at the expense of a slightly more accentuated fragility.

  Download PDF

• Product Code

  1117

  Grade

  15SMn13

  W.Nr.

  Nr.1.0715

  Automatic sulfur manganese steel; the limited % of sulfur allows the good treatment of hardening after cementation.

  Download PDF

• Product Code

  46S20

  Grade

  46S20

  W.Nr.

  Nr.1.0727

  Steel with the addition of sulfur only; the higher carbon content gives this quenched and tempered steel greater mechanical characteristics.

  Download PDF

• Product Code

  302

  Grade

  X10CrNi18-8

  W.Nr.

  Nr.1.4310

  Chromium-nickel austenitic stainless steel. The rather high carbon content allows high values of mechanical resistance to be achieved through extrusion hardening. Used for springs, antennas, and high resistance pieces.

  Download PDF

• Product Code

  CB10FF

  Grade

  C10C

  W.Nr.

  Nr.1.0214

  Low carbon steel with a chemical composition specially designed for cold deformation. The pieces obtained are generally subjected to carburization and tempering.

  Download PDF

• Product Code

  KV10
  R10S
  R10Pb

  Grade

  C10E
  C10R

  Wr.N.

  Nr.1.1121
  Nr.1.1207

  Low carbon non-alloy carburized steel. Temperable in water.

  Download PDF

• Product Code

  PR40

  Grade

  (38SMn28+Se)

  W.Nr.

  Nr.1.0760

  Free-cutting steel with an average carbon content; the addition of tellurium allows an even better machinability.

  Download PDF

• Product Code

  PS113 / TELYX

  Grade

  11SMnPb37

  W.Nr.

  Nr.1.0737

  Free-cutting steel with the addition of lead similar to the previous one, but with a higher sulfur content. It is the most common type in Italy and France and it provides excellent machinability. The Telyx version has a further improved machinability with respect to PS113.

  Download PDF

• Product Code

  KV15
  R15PB

  Grade

  C15E

  W.Nr.

  Nr.1.1141

  Non-alloy carburized steel with slightly more carbon than the previous one. Temperable in water.

  Download PDF

• Product Code

  44SMN28

  Garde

  44SMn28

  W.Nr.

  Nr.1.0762

  Free-cutting steel with sulfur only, with a high carbon content to obtain optimal hardness after tempering.

  Download PDF

• Product Code

  PR70-SAE1137

  Grade

  36SMn14

  W.Nr.

  Nr.1.0764

  A classic quenched and tempered free-cutting steel with the addition of sulfur only, it offers improved hardenability to ensure better machinability; it is also available in the quenched and tempered condition upon request.

  Download PDF

• Product Code

  PR60

  Grade

  28SMnPb28

  W.Nr.

   

  This steel is not unified in the standards. It is used when you want to obtain a mechanical resistance of circa 600 MPa, not achievable with other low-carbon free-cutting steels, while maintaining good machinability. Not suitable for heat treatments.

  Download PDF

• Product Code

  PR80-SAE1137PB

  Grade

  36SMnPb14

  W.Nr.

  Nr.1.0765

  Classic quenched and tempered free-cutting steel with the addition of sulfur and lead. The SAE1137Pb version, with the same composition, has a slightly higher temperability and is used for products delivered at the quenched and tempered state.

  Download PDF

• Product Code

  1215

  Grade

  1215

  W.Nr.

   

  Automatic Steel of American use with the addition of sulfur only, with good workability.

  Download PDF

• Product Code

  46S20PB

  Grade

  46SPb20

  W.Nr.

   

  Steel with the addition of sulfur and lead; the higher carbon content gives this quenched and tempered steel greater mechanical characteristics.

  Download PDF

• Product Code

  304Cu

  Grade

  X3CrNiCu18-9-4

  W.Nr.

  Nr.1.4567

  The addition of copper to the base characteristics of  AISI 304 significantly increases cold deformability. It is therefore used for fasteners and in general for cold moulded parts when they are complex and have extreme deformations.

  Download PDF

• Product Code

  316

  Grade

  X5CrNiMo17-12-2

  W.Nr.

  Nr.1.4401

  Chromium-nickel-molybdenum austenitic stainless steel: this combination allows it to resist the action of chlorides. It is the typical steel for use in marine environments or in the chemical and food industries.

  Download PDF

• Product Code

  316L
  316PLUS

  Grade

  X2CrNiMo17-12-2

  W.Nr.

  Nr.1.4404

  Steel with characteristics similar to AISI 316 but with a limited carbon content, which determines a higher resistance to intercrystalline corrosion and improved weldability. The 316Plus version, in addition to a controlled sulfur content, undergoes a special processing during the steelworks process that further improves machinability by chip removal.

  Download PDF

• Product Code

  316TISL
  316TI

  Grade

  X6CrNiMoTi17-12-2

  W.Nr.

  Nr.1.4571

  Steel with characteristics similar to AISI316; the addition of titanium makes it more stable and further improves its resistance to intercrystalline corrosion.

  Download PDF

• Product Code

  1.4435

  Grade

  X2CrNiMo18-14-3

  W.Nr.

  Nr.1.4435

  This steel is derived from AISI 316L with an increase in the minimum molybdenum and nickel content: it is one of the most resistant steels in marine environments and in general in the presence of chlorides. It is used in critical situations in contact with salt and in the food industry.

  Download PDF