Grade
Product Code
11SMN30
W.Nr.
1.0715
Description
11SMn30 is a free-cutting steel alloyed only with sulfur. It offers good machinability and excellent chip formation during machining. It is widely used for precision-turned parts and low-stress components.
11SMn30
204Cu
1.4597
X8CrMnCuN17-8-3 (AISI 204Cu) is an austenitic stainless steel with good corrosion resistance and excellent formability. It is suitable for a wide range of industrial applications.
X8CrMnCuN17-8-3 (AISI 204Cu)
SB4
1.0303
C4C is a very-low-carbon steel designed for the cold forming of small components with complex shapes and high deformation requirements.
C4C
AVZ
1.0736
11SMn37 is a free-cutting steel with a higher sulfur content than 11SMn30. It provides superior machinability but is slightly more brittle. It is commonly used for high-speed production of precision-turned parts.
11SMn37
302
1.4310
X10CrNi18-8 (AISI 302) is a chromium-nickel austenitic stainless steel. Its relatively high carbon content supports high mechanical strength after work hardening. Typical applications include springs, antennas, and high-strength components.
X10CrNi18-8 (AISI 302)
CB10FF
1.0214
C10C is a low carbon steel with a chemical composition specially designed for cold deformation. The pieces obtained are generally subjected to carburization and tempering.
C10C
LED108
1.0718
11SMnPb30 is a lead-alloyed free-cutting steel designed for high productivity. The lead addition provides exceptional machinability and excellent chip-removal performance. It is widely used in Germany for precision-turned parts.
11SMnPb30
303PLUS | 303
1.4305
X8CrNiS18-9 (AISI 303) is a sulfur-alloyed chromium-nickel austenitic stainless steel. Sulfur improves chip-removal machinability but reduces corrosion resistance in aggressive environments. The special Plus process further improves surface finish, tool life, and machine productivity.
X8CrNiS18-9 (AISI 303)
PS113 / TELYX
1.0737
11SMnPb37 is a lead-alloyed free-cutting steel with more sulfur than 11SMnPb30. It is widely used in Italy and France and provides excellent machinability. The Telyx version offers better machinability than PS113.
11SMnPb37
KV15 | R15PB
1.1141
C15E is a non-alloy carburizing steel with slightly more carbon than C10E. Its higher carbon content provides improved hardenability compared with standard low-carbon grades. It is suitable for water quenching.
C15E
GVR
1.4570
X6CrNiCuS18-9-2 is an austenitic stainless steel with properties similar to X8CrNiS18-9 (AISI 303). Copper improves machinability and also makes the grade suitable for certain cold-forming operations.
X6CrNiCuS18-9-2
TELBY
(11SMnPb30+Te+Bi) (Nr.1.0718) is a free-cutting steel alloyed with sulfur, lead, tellurium, and bismuth. It supports very high cutting speeds and excellent surface finishes. It also provides good cold formability.
11SMnPb30+Te+Bi
C16E
1.1148 | 1.1208
C16E is a non-alloy case-hardening steel similar to C15E. Its slightly higher manganese content improves hardenability.
C16E | C16R
TELBYPLUS
(11SMnPb37+Te+Bi) (Nr.1.0737) is a free-cutting steel with more sulfur than 11SMnPb30+Te+Bi. It provides maximum machinability for high-speed automated production. The grade combines productivity-focused manufacturing advantages in a single steel.
11SMnPb37+Te+Bi
PR60
-
28SMnPb28 is a non-standardized free-cutting steel. It can provide mechanical strength of approximately 600 MPa while retaining good machinability. This strength level is not normally available from other low-carbon free-cutting steels. The grade is not suitable for heat treatment.
28SMnPb28
RM20
1.7147 | 1.7149
20MnCr5/20MnCrS5 are manganese-chromium alloy steel grades with a slightly higher alloy content than 16MnCr5/16MnCrS5. They are suitable for larger components that require improved hardenability and strength.
20MnCr5 | 20MnCrS5
321 | 321SL
1.4541
X6CrNiTi18-10 (AISI 321) is an austenitic stainless steel with properties similar to X5CrNi18-10 (AISI 304). Titanium stabilizes the structure and improves resistance to intergranular corrosion.
X6CrNiTi18-10 (AISI 321)
347
1.4550
X6CrNiNb18-10 (AISI 347) is an austenitic stainless steel with properties similar to X6CrNiTi18-10 (AISI 321). Niobium stabilizes the structure and improves resistance to intergranular corrosion. It also supports performance after welding and exposure to elevated temperatures.
X6CrNiNb18-10 (AISI 347)
10SPB20
1.0722
10SPb20 is a widely used free-cutting steel suitable for case hardening. Silicon supports a uniform austenitic grain structure. Its controlled sulfur content supports reliable hardening after carburizing.
10SPb20
304ST
1.4306
X2CrNi19-11 (AISI 304L) is an austenitic stainless steel with properties similar to X2CrNi18-9 (AISI 304L). Its balanced composition is designed to improve cold formability. It is used for cold-formed components such as screws and pins.
X2CrNi19-11 (AISI 304L)
1117
15SMn13 is a sulfur-manganese free-cutting steel suitable for case hardening. Its controlled sulfur content supports effective hardening after carburizing.
15SMn13
35S20
1.0726
35S20 is a low-carbon steel alloyed with sulfur to improve machinability. It is suitable for components that require easy machining and moderate mechanical properties.
316
1.4401
X5CrNiMo17-12-2 (AISI 316) is a chromium-nickel-molybdenum austenitic stainless steel. Its composition provides resistance to chlorides. It is commonly used in marine, chemical, and food-industry applications.
X5CrNiMo17-12-2 (AISI 316)
PR70-SAE1137
1.0764
36SMn14 is a free-cutting steel alloyed with sulfur. It has good hardenability and machinability. It can also be supplied in the quenched-and-tempered condition upon request.
36SMn14
316L | 316PLUS
1.4404
X2CrNiMo17-12-2 (AISI 316L) is an austenitic stainless steel with properties similar to AISI 316 but contains less carbon. Its lower carbon content improves intergranular corrosion resistance and weldability. The 316Plus version combines controlled sulfur with a special steelmaking process to further improve chip-removal machinability.
X2CrNiMo17-12-2 (AISI 316L)
PR80-SAE1137PB
1.0765
36SMnPb14 is a classic quenched and tempered free-cutting steel with the addition of sulfur and lead. The SAE1137Pb version, with the same composition, has a slightly higher temperability and is used for products delivered at the quenched and tempered state.
36SMnPb14
316TISL | 316TI
1.4571
X6CrNiMoTi17-12-2 (AISI 316Ti) is an austenitic stainless steel with properties similar to AISI 316. Titanium stabilizes the structure and improves resistance to intergranular corrosion.
X6CrNiMoTi17-12-2 (AISI 316Ti)
1.4435
X2CrNiMo18-14-3 (AISI 316L) is an austenitic stainless steel based on AISI 316L but has higher minimum molybdenum and nickel contents. It provides high resistance in marine and chloride-containing environments. It is used in demanding salt-contact and food-industry applications.
X2CrNiMo18-14-3 (AISI 316L)
44SMN28
1.0762
44SMn28 is a sulfur-alloyed free-cutting steel. Its high carbon content supports optimum hardness after heat treatment.
44SMn28
SAE1144PB
1.0763
44SMnPb28 is a free-cutting steel alloyed with sulfur and lead. Its special carbon content supports excellent hardness after tempering.
44SMnPb28
430
1.4016
X6Cr17 (AISI 430) is a basic ferritic stainless steel with good corrosion resistance. It is widely used in appliances, grills, and the automotive industry. It provides good cold formability but is difficult to machine by chip removal. Welding requires appropriate precautions.
X6Cr17 (AISI 430)
46S20
1.0727
46S20 is a free-cutting steel alloyed with sulfur. Its higher carbon content provides greater mechanical strength after quenching and tempering.
430Nb
1.4511
X3CrNb17 is a ferritic stainless steel similar to X6Cr17 (AISI 430). Niobium improves machinability on machine tools while maintaining balanced corrosion resistance.
X3CrNb17
46S20PB
46SPb20 is a free-cutting steel alloyed with sulfur and lead. Its higher carbon content provides greater mechanical strength after quenching and tempering.
46SPb20
1.4105
X6CrMoS17 (AISI 430F) is a ferritic stainless steel similar to X3CrNb17. Sulfur improves machinability but reduces corrosion resistance. It is used for chip-removal machining and is the low-carbon version of AISI 430F. It is also selected for its low magnetic hysteresis.
X6CrMoS17 (AISI 430F)
434
1.4113
X6CrMo17-1 (AISI 434) is a ferritic stainless steel similar to X6Cr17 (AISI 430). Molybdenum improves its resistance to atmospheric corrosion at room and elevated temperatures.
X6CrMo17-1 (AISI 434)
Phone
E-mail
This site uses cookies to enhance your experience.